Detailed Product Description
STETILE SAMPLING TWIRLEM BAG: |
SAMPLING TWIRLEM BAG |
STETILE BAG: |
STETILE SAMPLING BAG |
TWIRLEM BAG: |
TWIRLEM |
STOMACHER OPEN TOP BAG: |
STOMACHER BAG |
FILTERED BAGS: |
FILTER BAG |
FILTRA SAMPLE BAG: |
BLENDER BAGS |
Aliquoting Blender: |
Filter Membrane |
Separating Solids And Liquids: |
Bag Mouth Opening |
Filtra-Bag: |
BLENDER |
Water Sampling Kits: |
Water Sampling BAGS |
Sterile Bags: |
Sampling Bags |
Testing Bags: |
LAB TESTING BAGS |
Sterile Sampling Blender Bags: |
Sampling Manipulations |
LAB BAGS: |
LAB TESTING BAGS |
Stomacher Blender: |
Bag Mixer |
Side Filter Blender Bags: |
BagFilter |
Microperforated Filter Bags: |
Filter Bags |
Lab Sterile Sampling Blender Bag With Filter: |
Sampling Blender Bag With Filter |
ALLA FRANCE: |
OMEGA |
Cole-Parmer: |
SAINT-GOBAIN |
Nasco: |
Burkard |
Dow Corning: |
Nalgene |
Corning: |
LAB CONSUMBLES |
Nasco Sampling Bag: |
Nasco STERILE Sampling Bag |
Nasco SAMPLE Bag: |
Nasco Bag |
Whirl-Pak Bags: |
Lab Blenders |
Standard Blender Bags: |
Filter Blender Bags |
Stand-Up Blender Bags: |
Plain Blender Bags |
VWR® Sterile Sample Bags: |
Sterile Sample Bags At Thomas Scientific |
Fisherbrand Sterile Sampling Bags With Flat-Wire Closures: |
Sterile Sample Bags: Industrial & Scientific |
Sterile Sampling Bags And Kits | Labplas: |
Labplas |
Lab Equipment & Supplies: |
Lab Supplies |
Sample Collection And Transport: |
AIR SAMPLING |
Bioproducts: |
Medical Testing Bags |
Microbiology Supplies: |
Air Tight Sampling Plastic Bags |































Sterile sampling bag
Feature:
1, a variety of specifications to choose from
2, the wire seal, sealing is good
3, transparent and with writing area can be choosen from
4, sample bag using gamma ray sterilization
5,No DNA enzyme, No RNA enzymes
Using way:
1, broke the dotted line seal
2, open the mouth to open both sides cross bracing
3, put the sample bag
4, grabbed on both ends of the wire and scroll three to four times
5, on both sides of the iron wire to fold sealed bag

Bagease sterile sampling bags are specially designed bag for microbiological analysis in variety of sizes, which are used as disposable laboratory consumables in a wide range. Applications vary from general blending purposes to samples preparation for analysis testing. For instance, it’s available for the dilution of meat, fish, fruits and vegetables.

The feature of bags is compatible with any lab blenders. On the top of bag, two stainless steel wires are fixed by tapes close to the seal. They apply to transferring and blending samples in various purposes of experiment. There are printing and no printing bags for different customer needs. Sterile sampling bags are manufactured from high quality poly ethylene which is transparent for easy observation. Bags are available for all sample types: food, blood, hair, cloth, soil and others.

To avoiding cross contamination, bags are sterile by Gamma or E.O. irradiation. They can be resistant to high temperature of 100 degrees. All Bagease sterile sampling bags are packaged in bags with sterilization, RNase-free, DNase-free and Non-pyrogenic

Product feature:
1. Various volumes for different testing
2. Specialized for sampling and temporary storing.
3. All bags are sterilized with Gamma irradiation
4. RNase-free, DNase-free and Non-pyrogenic.
Packaging information:
Composite film bags are used for packaging
Lot number is printed on packaging for tracking
Cartons are customized for protecting products from damage.

Colour Sterile Sampling Bags
bags with tape colors of white, blue, and red for 4oz (118ml), 18oz (532ml), 24oz (710ml), and 55oz (1,627ml) bags. This exciting new feature allows you to isolate samples according to the colored tape, providing an instant visual indicator for each section of the lab or plant, differentiate between treated and non-treated samples, or keep allergens separated from regular samples

Environmental Surface Sampling Bags
bag is designed for environmental surface sampling of work areas, equipment, animal carcasses, and any other place where testing for Listeria, Salmonella, E. Coli, coliforms, and other foodborne pathogens, or anthrax is required.

The special dry sponge is free of bactericides and has been tested to be non-inhibitory. It measures approximately 1½” x 3” x 5/8” (3.8 x 7.6 x 1.5cm) thick when wet, and is sterilized inside a Whirl-Pak® bag. Wearing a sterile glove when wiping with the sponge is recommended to help prevent contamination. After the sample has been collected and the sponge returned to the bag, it can be sent to a lab for testing. In the lab, media may be added directly to the bag, and the sample incubated inside the bag for a +/- test, or the sample may be squeezed out of the sponge, pipetted, and plated out.

The 55oz bag is designed to be used in a homogenizer blender for thorough mixing of the sample and media for USDA-ARS standard procedure to identify foodborne pathogens

Available with a sterile, ambidextrous, large size polyethylene glove attached in a bottom compartment
Environmental surface sampling can be faster and easier by using the pre-moistened bags. The sponge is ready to use and is hydrated with 10ml of neutralizing buffer that will neutralize several surface sanitizers including quaternary ammonium compounds, phenolics, iodine preps, chlorine preps, mercurials, formaldehyde, and glutaraldehyde. To use, squeeze out excess buffer from the sponge - this can be done by squeezing the sponge from the outside with two hands or squeezing the sponge with a sterile gloved hand after opening the bag. Wipe the surface to be tested, return the sponge to the bag, close, and send to the lab for analysis.

The buffer has a 24 month shelf life from date of manufacture and each carton is marked with an expiration date; no refrigeration is necessary. The bags are packaged in a foil liner bag to prevent evaporation of the buffer. Buffer contains monopotassium phosphate, sodium thiosulfate, and aryl sulfonate complex.

Sterile Blender Bags
Bags are specially designed for use with homogenizer blenders. They are made from extra-heavy polyethylene and have special features to make sample testing easier and more efficient.

Round Bottom Seal
The B01239WA bag features a special round bottom seal designed to minimize sample fragments from getting caught in the corners of the bag during blending.

Filter Blender Bags
Filter Bags contain a third layer of finely perforated polyethylene film, which filters out solids in the blended sample, allowing for easy pipetting of the liquid. The hole diameter in the filter layer measures .013 inches (.33 mm), 330 microns, and there are 1,840 holes per square inch (285 per square cm). The filter layer inside the bag is sealed into the sides and bottom perimeter, allowing the sample to be placed in the bag on either side. Liquids of a blended sample will transfer through the filter, while solids remain on one side.

Stand-Up Blender Bags
These bags have a special gusset on the bottom which flattens out when the sample is placed inside, allowing it to stand up completely by itself. Both hands are free to work with the sample.

Plain Blender Bags
When the sample does not have to be retained, these bags are designed for quick testing and disposal. Usually the sample is homogenized, tested and then discarded. The bags are sterilized and made of heavy-duty polyethylene. Bags are packaged with 50 in a sealed liner bag. Cut the liner and pull the bag out by the bottom. These are quality without the wire-closing tab.

Standard Blender Bags
Filter Blender Bags